With the continuous progress of social science, technology and economy, the requirements of human treatment of the environment are more and more important, advocating environmental protection from their own start, can not drive as far as possible not to drive, but this is a small part of the pollution of the environment, in fact, the cause of environmental pollution or factory enterprises, we all know that the factory in the production process will produce some pollutants, Therefore, if you want to protect the environment, it is mainly necessary to take environmental protection measures for factories and enterprises.

The basic structure is composed of dust removal box, centrifugal fan, filter bag (filter cartridge), dust collector and microcomputer controller, etc. The dust is sucked inside the dust collector box by the negative pressure of the fan through the dust suction pipe, the use of gravity and upward, At first, the coarse particle dust is initially filtered by the filter and directly falls to the dust collector, the fine dust is captured by the filter on the outer surface, and the clean gas is filtered and decomposed by the filter element of the filter into the clean room, and then discharged by the fan from the outlet. The whole process of dust removal and filtration is the result of comprehensive effects such as gravity, inertial force, collision, electrostatic adsorption and screening.

advantages of central dust collection system In the dust can be divided into automatic control and manual control. After the manual fan dust collector is suspended, the active task of the cleaning mechanism is suspended after tens of seconds, and the cleaning motor can be activated at any time according to the demand. The cleaning time is adjusted by the user. Automatic control means that when the fan continues the task, the advantages of central dust collection system cleaning mechanism actively vibrates ash on time.

advantages of central dust collection system for high density metal chips, casting sand, such as lathes, grinders, milling machines, polishing machines, grinding machines, grinding machines, etc., and medium density dust, as well as lighter density dust have good dust removal effect. Such as steel polishing, casting industry, ceramic industry, glass industry and not afraid of fire materials, cement building materials, grinding wheel manufacturing, chemical products, machining and other industries of dust removal.

advantages of central dust collection system What are the structural features?

1, the fan parts adopts the imitation centrifugal fan, the air volume is large, the wind pressure is high, the fan characteristic curve is hard, and the noise reduction measures are adopted, and the noise is small when used.

2, the filter parts are made of 208 industrial polyester twill flan cloth filter, each bag is equipped with spring steel mesh, the filter effect is good, the replacement of the filter bag is convenient, good service life.

3. The cleaning mechanism of the filter component is to use the motor to drive the eccentric wheel, and the connecting rod makes the cloth bag shake and stick to the dust on the outer surface of the filter bag. The control device is divided into two kinds: automatic control and manual control. Automatic control means that when the fan is working continuously, the flight cleaning mechanism will automatically vibrate the ash at a regular time. Manual control means that the flight cleaning mechanism will automatically work after the fan stops, and it will automatically stop after tens of seconds. The dust cleaning motor can also be started at any time according to the need.

4, the filter component is equipped with a wide and sealed collapsible access door, so as to repair and remove the filter when necessary.

5, dust collector parts adopt a suction structure, dust is convenient.

6. The air inlet interface on the upper side of the dust collector can be folded down when needed, so as to increase the use of the air inlet area.

7, the advantages of central dust collection system there are 16 kinds of specifications, divided into A, B two types. Type A is equipped with ash bucket drawer, type B is not equipped with ash bucket drawer. The lower part of the flange; It is directly connected by the user to the dumping port of the folding bin, the mixing warehouse, the sandblasting box, the belt transportation turning point and other dust collecting equipment on the spot, and the dust is directly recovered.

8, the advantages of central dust collection system can be manufactured according to the actual needs of design units or users.

advantages of central dust collection system https://www.kaisenfilter.com/central-dust-collection-system.html